All Davis Lighting products have been designed with saving time and money in mind.

By striving to produce products that provide superior performance, and are easy to install and maintain, we can help our clients become more cost and time efficient.

Simple and well thought out innovations are an integral part of every product that comes from the Davis Lighting R&D division.

   
  The Slimline batten range uses a 90o twist turn knob to secure the gear tray cover to the body. No tools are necessary to remove the cover for installation or maintenance. This also means no possibility of the inconvenience of loosing cover screws. installing a batten has never been faster and easier .

 
A range of SlimLine square and round diffuser kits can be added either at or after installation of the batten. The diffuser
finishes are in a variety of patterns including prismatic (as shown), opal, reeded and shower screen pattern. The diffuser kit can be simply installed without the use of tools. The variety of diffusers and the ease at which they can be installed or changed makes the SlimLine batten a truly versatile luminaire		  

 
  All Davis Lighting Linear T8 fluorescent louvred luminaires such as the Callisto low bright model shown above employ a latch
system unique to Davis Lighting. The latch system allows the louvre to be hinged down from one end, or completely removed for maintenance . The louvre can be fitted only one way, eliminating the possibility of installation errors, and is positively earthed to the frame for safety. With this latch system there is no confusion as to how the louvre is to be removed for maintenance, so often the case with louvred luminaires utilizing the wishbone spring system. With Davis Lighting there is no chance of accidental damage to the louvre due to confusion by unfamiliar maintenance staff.

   
 
   
The Low Bay Pac is easy and fast to install as the base can be mounted and hard wired prior to installation of the luminaire. A simple plug -in arrangement completes the installation.

 
For maintenance the main body is hinged to allow clear unobstructed access to the control gear and lamp chamber.
 
Installation of HID luminaires is always a concern due to the weight of the fixture, and in many cases, limited access around the incoming cables termination area. This is not a concern with the Davis Low Bay Pac. After fitting the base only, hard wiring of incoming cables can be completed. The main body is then hung from the hinge end of the base which takes the weight of the luminaire. The main body is then swung into position on the base, and a support bracket is inserted. This secures the luminaire while the main body is screwed to the base using a single captive screw.

As well as clear unobstructed access to the control gear and lamp chamber, the control gear is mounted on a tray, which is easy to remove for replacement.